Shanghai Medigrade Industry Co., Ltd.  

Product Name: Automatic Flat Type Al / Pl Blister Packag Machine for Mask Model NO.: DPP350A Warranty: 2 Year Condition: New Customized: Customized Computerized: Computerized Voltage: 380V Certification: CE, GMP Precision: High Precision Finished Dosage Form: Tablet Type: Pharmaceutical Packaging Machinery Clean Compressed Air (Pressure): 0.5~0.7MPa Air Consumption(M³min): ?0.4 Packing Material Trange of Stroke(mm): 40-240 Harmacy PVC (mm): (0.2-0.4)X350 Ptp Alu Foil (mm): (0.02-0.05)X350 Trademark: Medigrade Transport Package: Marine Transportation Specification: 2500kg Origin: Shanghai, China Product Description OverviewDPP350A flat mask blister packaging machine is a special equipment for blister-type aluminum (PTP) / plastic (PVC) composite sealing package for beauty, body products (eye mask, mask, pleura) and similar materials, due to the use of positive pressure Forming, flat pressure heat sealing, it has the characteristics of blister blister, flat plate and so on, which is favored by the industry.The DPP350A flat mask blister packaging machine produced by our company adopts frequency conversion speed regulation and automatic control technology of machine, electricity, light and gas, and carries out innovative design strictly according to the requirements of "GMP" standard of pharmaceutical industry. This model has many functions such as photoelectric photo-automatic photoelectric cell-to-plate version, wide stroke range, complete machine split combination, modular structure and other functions. It is the sixth generation product of our company. This model has been continuously improved and updated by the company, and it is more practical and economical compared with imported equipment. The company is equipped with professional technical support and after-sales service, and delegates technical personnel to the customer enterprise for machine debugging, technical guidance and personnel training.Innovation1. The DPP350A flat mask blister packaging machine produced by our company can be divided into 1.5m elevators and split-type purification workshops. The combination is cylindrical pin positioning and screw fastening, which is easy to assemble.2. The mold is clamped by pressure plate, which is very convenient for loading and unloading.3. The main motor adopts frequency conversion speed regulation: (the number of punching times can reach 30 times/min.) The corresponding number of punching times is set according to factors such as the length of the stroke and the difficulty of feeding the stuffed material.4. Servo traction mechanism is adopted, the operation is stable, the synchronization is accurate, and the stroke is arbitrarily selectable within the range of 50-220mm, that is, the layout size can be freely designed within the range. Due to the contact-type plate heating, the heating power and temperature are reduced, energy is saved and the stability of the plastic sheet is increased.5. The forming heating plate is automatically closed and opened, and can be turned on after the heating plate is put down, and the material waste is limited to a range of the plate.6. Air cushion heat sealing: When the machine is stopped, the mesh plate is automatically raised by the cylinder. It eliminates the deformation phenomenon of the blister caused by heat radiation during the stay, facilitates the cleaning work of the anilox plate, and at the same time acts as a buffer for the super pressure, which is beneficial to prolonging the service life of the machine.7. Upper and lower netting male and female with heat sealing: that is, the front and back sides are point-like netting, because the stress is equal, the plate is more flat, and the sealing performance is improved.8. PVC finished and broken pieces automatically alarm and stop, which is convenient for operators to replace and continue PVC in time.9. All parts in contact with the drug, including the hopper, are made of stainless steel and non-toxic materials and meet the requirements of "GMP".Min Technical ParameterCapacity (Cycle/min )10-25(cycle/min)Packing material: Range of stroke(mm) 40-120Pharmacy PVC (mm) (0.2-0.4)x350PTP alu foil (mm) (0.02-0.05)x350Clean compressed air (pressure) 0.5~0.7MPaAir consumption(m³min)≥0.4PowerAC380V 50HZ 11KWWater chiller for mouldsTop water or recycle water with 60L/h consumptionOverall dimension (LxWxH)(mm)5100 x 750 x 1700Net Weight2500kgIf you are interested in this, please contact me: Nana Zhang